F065
የውጪው ቧንቧ መደበኛ ዲያሜትር፡
- በ HL ክሪዮጀኒክ መሳሪያዎች የኢንተርፕራይዝ ደረጃ የሚመከር። እንዲሁም በደንበኛው ፍላጎት መሰረት ሊመረት ይችላል።
- የዲዛይን ግፊት፡
- የሚመከር ≤ 16 ባር። ወይም የተበየደ የግንኙነት አይነት (≤40 ባር) ይምረጡ።
- የውጪ ቱቦ ቁሳቁስ
ልዩ ፍላጎት ከሌለ የውስጥ ቱቦ እና የውጪ ቱቦው ቁሳቁስ በተመሳሳይ መንገድ ይመረጣል።
3.1.3 የተገጣጠመ የግንኙነት አይነት
ኦዴል
ግንኙነት
አይነት
የውስጥ ቧንቧ መደበኛ ዲያሜትር
የዲዛይን ግፊት
ቁሳቁስ
የውስጥ ቧንቧ
መደበኛ
ማስታወሻ
W010
00X
ለስታቲክ ቫክዩም የተገጠመ ተጣጣፊ ቱቦ የተበየደ የግንኙነት አይነት
DN10፣ 3/8"
8~40 ባር
300 ተከታታይ አይዝጌ ብረት
ASME B31.3
| V | DN20፣ 3/4" | DN25፣ 1" | የውጪው ቧንቧ መደበኛ ዲያሜትር፡ | |
| የዲዛይን ግፊት | የውስጥ ቧንቧ ቁሳቁስ። | ሀ 304 ነው፣ | DN40፣ 1-1/2" | ሲ 316 ነው፣ |
| D 316 ሊትር ነው፣ | HLHS | HLHS | W015 | 00X |
| DN15፣ 1/2" | No | No | HLHS | የዲዛይን ግፊት |
| Nominal Diameter of Inner Pipe | 00X | HLHS | W025 | 00X |
| Design Pressure | HLHS | DN32፣ 1-1/4" | 00X | DN32፣ 1-1/4" |
| HLHS | HLHS | HLHS | DN40፣ 1-1/2" | HLHS |
| የሚመከር ≤ DN25 ወይም 1"። ወይም የቫክዩም ባዮኔት የግንኙነት አይነትን ከፍላንጅስ እና ቦልቶች ጋር (ከ DN10፣ 3/8" እስከ DN80፣ 3")፣ የተገጣጠመ የግንኙነት አይነት (ከ DN10፣ 3/8" እስከ DN150፣ 6") ይመርጣል። | 00X | |||
| DN50፣ 2" | HLHS | |||
| Material | 300 Series Stainless Steel | |||
| መደበኛ | LN2HLHS2W080 | |||
00X
DN80፣ 3"
| LHSW100 | |
| 00X | |
| DN100፣ 4" |  |
LHSW125
| 00X | DN125፣ 5" | LHSW150 | 00X | DN150፣ 6" | የውጪው ቧንቧ መደበኛ ዲያሜትር፡ |
| በ HL ክሪዮጀኒክ መሳሪያዎች የኢንተርፕራይዝ ደረጃ የሚመከር። እንዲሁም በደንበኛው ፍላጎት መሰረት ሊመረት ይችላል። | የውጪ ቱቦ ቁሳቁስ | DN25፣ 1" | DN25፣ 1" | DN25፣ 1" | DN25፣ 1" |
| አይነት | DN25፣ 1" | DN25፣ 1" | DN25፣ 1" | DN25፣ 1" | |
| መደበኛ | DN25፣ 1" | DN25፣ 1" | DN25፣ 1" | DN25፣ 1" | |
| DN10፣ 3/8" | DN25፣ 1" | DN25፣ 1" | DN25፣ 1" | DN25፣ 1" | |
| የዲዛይን ግፊት። | / | DN25፣ 1" | DN25፣ 1" | / | |
| የውስጥ ቧንቧ ቁሳቁስ። | / | DN25፣ 1" | DN25፣ 1" | / | |
| ሲ 316 ነው፣ | / | DN25፣ 1" | DN25፣ 1" | / | |
| HLHS | / | DN25፣ 1" | DN25፣ 1" | / | |
| DN15፣ 1/2" | / | DN25፣ 1" | DN25፣ 1" | / | |
| 00X | / | / | DN25፣ 1" | / | |
| HLHS | / | / | DN25፣ 1" | / | |
| 00X | / | / | DN25፣ 1" | / |
የውስጥ ቧንቧ መደበኛ ዲያሜትር:
| የሚመከር ≤ DN25 ወይም 1"። ወይም የቫክዩም ባዮኔት የግንኙነት አይነትን ከፍላንጅስ እና ቦልቶች ጋር (ከ DN10፣ 3/8" እስከ DN80፣ 3")፣ የተገጣጠመ የግንኙነት አይነት (ከ DN10፣ 3/8" እስከ DN150፣ 6") ይመርጣል። | የውጪው ቧንቧ መደበኛ ዲያሜትር፡ |
| በ HL ክሪዮጀኒክ መሳሪያዎች የኢንተርፕራይዝ ደረጃ የሚመከር። እንዲሁም በደንበኛው ፍላጎት መሰረት ሊመረት ይችላል። | የዲዛይን ግፊት፡ |
| የሚመከር ≤ 16 ባር። ወይም የተበየደው የግንኙነት አይነት (≤40 ባር) ይመርጣል | የውጪ ቱቦ ቁሳቁስልዩ ፍላጎት ከሌለ የውስጥ ቱቦ እና የውጪ ቱቦው ቁሳቁስ በተመሳሳይ መንገድ ይመረጣል።3.2 ተለዋዋጭ የቫኩም ኢንሱሌተር የቧንቧ ስርዓት3/S |
| 3.2.1 የቫኩም ባዮኔት የግንኙነት አይነት ከክላምፕስ ጋር | ኦዴል |
| ግንኙነት | አይነት |
| የውስጥ ቧንቧ መደበኛ ዲያሜትር | የዲዛይን ግፊት |
| ቁሳቁስ | የውስጥ ቧንቧ |
| መደበኛ | ማስታወሻ |
HDB01008
የቫክዩም ባዮኔት የግንኙነት አይነት ከክላምፕስ ጋር ለዳይናሚክ ቫክዩም ኢንሱሌድ ኢንሱሌድ ተጣጣፊ ቱቦ
lDN10፣ 3/8"
l8 ባር
| 300 ተከታታይ አይዝጌ ብረት ሲ 316 ነው፣ | የውስጥ ቧንቧ ቁሳቁስ። | |
| ሀ 304 ነው፣ | ቢ 304 ሊትር ነው፣ሲ 316 ነው፣D 316 ሊትር ነው፣ | |
| ኢ ሌላ ነው። | ኤችኤልኤች | DB01508 |
| DN15፣ 1/2" | የዲዛይን ግፊት፡ | የዲዛይን ግፊት፡ |
| DN20፣ 3/4" | የዲዛይን ግፊት፡ | የዲዛይን ግፊት፡ |
| DN25፣ 1" | የዲዛይን ግፊት፡ | የዲዛይን ግፊት፡ |
| የውጪው ቧንቧ መደበኛ ዲያሜትር፡ | የዲዛይን ግፊት፡ | የዲዛይን ግፊት፡ |
የሚመከር ≤ 8 ባር። ወይም የቫክዩም ባዮኔት የግንኙነት አይነትን ከፍላንጅስ እና ቦልቶች ጋር (≤16 ባር)፣ የተገጣጠመ የግንኙነት አይነት (≤40 ባር) ይመርጣል።የውጪ ቱቦ ቁሳቁስልዩ ፍላጎት ከሌለ የውስጥ ቱቦ እና የውጪ ቱቦው ቁሳቁስ በተመሳሳይ መንገድ ይመረጣል።
የኃይል ሁኔታ፡
HL-HX-X-ቦታው ለቫክዩም ፓምፖች ኃይል መስጠት እና ለኤችኤል ክሪዮጂኒክ መሳሪያዎች የአካባቢውን የኤሌክትሪክ መረጃ (ቮልቴጅ እና ሄርትዝ) ማሳወቅ አለበት።-00-X
3.2.2 የቫኩም ባዮኔት የግንኙነት አይነት ከፍላንጅስ እና ቦልቶች ጋር
ኦዴል
ግንኙነት
አይነት
የውስጥ ቧንቧ መደበኛ ዲያሜትር
የዲዛይን ግፊት
ቁሳቁስ
የውስጥ ቧንቧ
መደበኛ
ማስታወሻ
Nominal Diameter of Inner Pipe
00X
8~16 ባር
DN10፣ 3/8"
8~16 ባር
300 ተከታታይ አይዝጌ ብረት
Design Pressure
የዲዛይን ግፊት።
08 8ባር ነው፣
16 16 ባር ነው።
የውስጥ ቧንቧ ቁሳቁስ።
ሀ 304 ነው፣
ቢ 304 ሊትር ነው፣
ሲ 316 ነው፣
D 316 ሊትር ነው፣
ኢ ሌላ ነው።
F015
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSF040X | የቫክዩም ኢንሱሌተር የደረጃ መለያ ተከታታይ | DN10, 3/8" | አርመንያኛ
| 300 Series Stainless Steel | ASME B31.3 | X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ፈረንሳይኛየውጪው ቧንቧ መደበኛ ዲያሜትር፡X | DN15, 1/2" | |||||
| ፈረንሳይኛየሚመከር ≤ 16 ባር። ወይም የተበየደ የግንኙነት አይነት (≤40 ባር) ይምረጡ።X | DN20, 3/4" | |||||
| ፈረንሳይኛየኃይል ሁኔታ፡X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: አይስላንዲ ክ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| ፈረንሳይኛ08 8ባር ነው፣00X | እና 25፣ 32፣ 40። | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ፈረንሳይኛሳሞአን00X | DN15, 1/2" | |||||
| ፈረንሳይኛስንድሂ00X | DN20, 3/4" | |||||
| ፈረንሳይኛታጂክኛ00X | DN25, 1" | |||||
| ፈረንሳይኛታይ00X | DN32, 1-1/4" | |||||
| ፈረንሳይኛኡዝቤክ00X | DN40, 1-1/2" | |||||
| ፈረንሳይኛዛይሆሳ00X | DN50, 2" | |||||
| ፈረንሳይኛዙሉ00X | DN65, 2-1/2" | |||||
| ፈረንሳይኛኦሪያ00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: የኃይል ሁኔታ፡
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHS00X00X | DN10፣ 3/8" | DN10, 3/8" | 300 ተከታታይ አይዝጌ ብረት | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ፈረንሳይኛDN15፣ 1/2"00X | DN15, 1/2" | |||||
| ፈረንሳይኛDN20፣ 3/4"00X | DN20, 3/4" | |||||
| ፈረንሳይኛDN25፣ 1"00X | DN25, 1" | |||||
| ፈረንሳይኛW03200X | DN32, 1-1/4" | |||||
| ፈረንሳይኛW04000X | DN40, 1-1/2" | |||||
| ፈረንሳይኛW05000X | DN50, 2" | |||||
| ፈረንሳይኛW06500X | DN65, 2-1/2" | |||||
| ፈረንሳይኛW08000X | DN80, 3" | |||||
| Hየቫኩም ጃኬት ቱቦ00X | DN100, 4" | |||||
| Hየቻይና ፈሳሽ የኦክስጅን ፍሰት መቆጣጠሪያ ቫልቭ00X | DN125, 5" | |||||
| Hየጅምላ ዋጋ ቻይና ቻይና ISO መደበኛ ታንክ 2...00X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHSዳይናሚክ የቫኩም ፓምፕ ሲስተም00X | የቫክዩም ኢንሱሌተር የደረጃ መለያ ተከታታይ | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| ፈረንሳይኛዋትስአፕ00X | DN15, 1/2" | |||||
| ፈረንሳይኛዋትአፕ00X | DN20, 3/4" | |||||
| ፈረንሳይኛጀርመንኛ00X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: ግሪክኛ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
ዳኒሽ
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLላኦX | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | አርመንያኛ
| 300 Series Stainless Steel | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHኢስቶኒያንX | DN15, 1/2" | |||||
| HLHፍሪሲያንX | DN20, 3/4" | |||||
| HLHጉጅራቲX | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: አይስላንዲ ክ
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLማላያላም00X | ማኦሪይ | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDሳሞአን00X | DN15, 1/2" | |||||
| HLHDስንድሂ00X | DN20, 3/4" | |||||
| HLHDታጂክኛ00X | DN25, 1" | |||||
| HLHDታይ00X | DN32, 1-1/4" | |||||
| HLHDኡዝቤክ00X | DN40, 1-1/2" | |||||
| HLHDዛይሆሳ00X | DN50, 2" | |||||
| HLHDዙሉ00X | DN65, 2-1/2" | |||||
| HLHDኦሪያ00X | DN80, 3" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3". Or selects the Welded Connection Type (from DN10, 3/8" to DN150, 6"), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8" to DN25, 1").
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤40 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~40 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDW01500X | DN15, 1/2" | |||||
| HLHDW02000X | DN20, 3/4" | |||||
| HLHDW02500X | DN25, 1" | |||||
| HLHDW03200X | DN32, 1-1/4" | |||||
| HLHDW04000X | DN40, 1-1/2" | |||||
| HLHDW05000X | DN50, 2" | |||||
| HLHDW06500X | DN65, 2-1/2" | |||||
| HLHDW08000X | DN80, 3" | |||||
| HLHDW10000X | DN100, 4" | |||||
| HLHDW12500X | DN125, 5" | |||||
| HLHDW15000X | DN150, 6" |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLHDT01000X | Vacuum Bayonet Connection Type with Clamps for Dynamic Vacuum Insulated Flexible Hose | DN10, 3/8" | 8~16 bar | 300 Series Stainless Steel | ASME B31.3 | 00: Design Pressure. 08 is 8bar, 16 is 16bar.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLHDB01500X | DN15, 1/2" | |||||
| HLHDB02000X | DN20, 3/4" | |||||
| HLHDB02500X | DN25, 1" |
Nominal Diameter of Inner Pipe: Recommended ≤ DN25 or 1". Or selects the Vacuum Bayonet Connection Type with Flanges and Bolts (from DN10, 3/8" to DN80, 3"), Welded Connection Type (from DN10, 3/8" to DN150, 6")
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects the, Welded Connection Type (≤40 bar)
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz).
